Why Quality Materials Matter In Asphalt Sealcoating: A Guide For Property Owners In Austin, TX

Being an owner of a property in Austin, TX, that has an asphalt surface, it is no surprise that you want to keep your pavement looking its best for as long as possible. Asphalt sealcoating is a great way to do so, but it can be tricky without using the right materials. This article will discuss why quality materials are important and the benefits they can bring.

What Is Asphalt Sealcoating And Why Is It Important

Asphalt sealcoating is a protective layer applied to asphalt surfaces to help preserve and protect them from the damaging effects of weather, UV rays, vehicle fluids, and other destructive elements. This coating helps prevent cracking, crumbling, and potholes; it also adds a decorative finish that can enhance the overall look of your property. Sealcoating is a great way to maintain the integrity of your asphalt pavement and protect it from the elements. By regularly seal coating your asphalt, you can extend its life and keep it looking new for many years.

What Are The Benefits Of Hiring A Paving Contractor That Uses High-Quality Materials In Asphalt Sealcoating

When it comes to asphalt sealcoating, hiring a professional paving contractor that uses high-quality materials is essential for many reasons. The following are some of the most notable ones.


High-quality materials are designed to withstand harsh elements, from extreme heat and cold to moisture, chemicals, and more. This means that the asphalt sealcoating is less likely to crack or chip over time, helping it last longer and resist damage better than lower-quality sealants.


Asphalt sealcoating not only beautifies pavement and parking lots, but also helps protect them from harmful elements, such as oil, gas, salt, and UV rays. The higher-grade materials are designed to provide the best protection against these substances.


If you want your asphalt paving to look attractive and uniform for years to come, then you should opt for high-quality sealants. The materials used in the sealing process will give the pavement a glossy and even finish that can really enhance its overall appearance.

Cost savings

Over time, sealants made from high-grade materials will prove to be more cost-effective since they require less maintenance and fewer repairs.


High-quality sealants are designed to provide a safe surface for pedestrians and vehicles alike. The materials used in asphalt sealcoating can help prevent slipping, skidding, and other issues that can lead to accidents or injuries.

Overall, hiring Contractors Asphalt in Austin, which is a professional paving contractor that uses high-quality materials, for an asphalt coating job will ensure that the job is done right and with long-lasting results. The benefits of using high-grade materials are numerous, making the investment well worth it.

How To Find A Paving Contractor In Austin, Texas That Uses Quality Materials When It Comes To Asphalt Sealcoating

There are some ways that you can go about finding a paving contractor in Austin, Texas, that uses quality materials when it comes to asphalt sealcoating.

First and foremost, you can ask for recommendations from family, friends, and colleagues if they know of any paving contractors in Austin that they have heard good things about. Word-of-mouth is a great way to find reliable, quality contractors in the area.

Another way to find an experienced and reputable paving contractor is to search online. Just search for "Asphalt sealcoating in Austin," and you will get a list of local contractors. Be sure to read their reviews and ratings to determine which ones are best for your particular project.

Finally, you can always contact the local Chamber of Commerce or Better Business Bureau to get more information on different paving contractors in Austin. They can provide you with a list of companies that are approved and certified to work with asphalt sealcoating, so you know that they have experience and quality materials.

What To Consider When Choosing An Austin, Texas Paving Contractor For Your Asphalt Sealcoating Job

When selecting an Austin, Texas, paving contractor for your asphalt sealcoating job, there are several important factors to consider.

Quality materials

You'll want to make sure that the company you choose uses only the highest-quality sealcoat materials. Be aware that some contractors will use cheaper materials or cut corners in order to save a buck.


Make sure that the contractor has a proven track record of completing jobs quickly and correctly. Check reviews from past customers and ask to see pictures of previous work completed by the contractor.


The cost of an asphalt sealcoating job can vary widely, depending on the size of the job, the materials used, and other factors. Be sure to get several estimates from different contractors before you make a decision.

Insurance and licensing

It's important to verify that any contractor you hire is properly licensed and insured. This will help protect both the contractor and you in case of an accident or other issues during the job.


When it comes to sealcoating, experience counts for a lot. Make sure that you hire a contractor who has plenty of experience with similar jobs in the Austin area.

By hiring a qualified paving contractor like Contractors Asphalt, which possesses all of the above qualities, you can ensure that your asphalt sealcoating job is done right and on time. With them, you'll get the highest-quality materials, workmanship, and service at a competitive price.

How To Maintain Your Sealcoated Asphalt Surface To Ensure Its Longevity And Effectiveness

It is no secret that sealcoating your asphalt surfaces will help protect them from the elements and preserve their life, but it is important to remember that proper maintenance of your sealcoated surface is essential for it to remain effective. Here are some tips on how to maintain the sealcoated asphalt surface of your property to ensure its longevity and effectiveness.

Inspect the surface regularly

Sealcoating is only effective when it is done correctly, so you should inspect your sealcoated surface every couple of months for any signs of cracking, fading, or deterioration. If any of these issues are spotted then you should contact a professional to repair the problem and re-seal the surface to ensure its protection.

Clean up spills immediately

It is important to clean any oil, gas, or other liquid spills from your sealcoated asphalt surface as soon as possible. Not only will this help prevent staining of the surface, but it will also help protect the sealant from breaking down and becoming ineffective.

Trim back vegetation

Since sealcoating is designed to protect your asphalt surfaces from the elements, it is important to make sure that no vegetation is growing near your sealcoated surface. If there are any trees or bushes in close proximity, then you should trim them back so that their roots do not penetrate and damage the surface.

Following these tips will help ensure that your sealcoated asphalt surface remains effective and in good condition for many years to come. If you have any questions or concerns about the maintenance of your sealcoated surface, be sure to reach out to a professional for assistance.

Contact A Paving Contractor In Austin, Texas

Asphalt sealcoating is an important part of protecting and preserving your asphalt surfaces. It can also add to the aesthetic appeal of your property. Hiring a paving contractor that uses quality materials and has the experience to install your asphalt sealcoating is essential for a long-lasting, beautiful finish.

If you're in Austin, Texas, and you need professional help with your asphalt sealcoating, contact the team at Contractors Asphalt. Their experienced professionals can provide quality service for all of your asphalt needs. Contact them to learn more.

Arnold Kinsland
Arnold Kinsland

Proud web trailblazer. Lifelong beer practitioner. Typical food enthusiast. Professional food evangelist. Lifelong beer aficionado.